“T-Type” insulating enclosures

Alongside the wide range of traditional metal enclosures for ILME multipole connectors, there is now available a new series of enclosures in self-extinguishing

thermoplastic material in the most common sizes of “44.27”, “57.27”, “77.27” and “104.27”.

Quality and low cost are the main features of these enclosures, as an outcome of

careful product studies.

Valuable characteristics of these new enclosures:

- structurally solid and mechanically robust, due to their increased thickness;

- resistance to the main chemical agents, found in industrial environments

(see tab. page 3);

- pre-fastened gaskets for easier installation;

- external dimensions of the bulkhead-mount and of the surface mount housings

are similar to those of the corresponding metal housings; hole fixing

centres are unchanged;

- wide space inside enclosures for cables, with mounted connectors,

similar to their corresponding metal version high construction enclosures;

- the possibility with their use to create total insulation constructions

(equivalent to class II) V;

- the surface mounting, high construction housings are supplied with an

open threaded entry and diametrically opposite a closed threaded

entry, which can be opened by the user, if required (with suitable tool);

- absence of powder paint for environments in which these are not

recommended;

- non-electrostatic thermoplastic material.

- manufactured from insulating material, they do not require a special reinforced

insulation as metal ones do, for use with series CME higher voltage connector

inserts (screw-type terminals);

- degree of protection for coupled connectors is IP65 according to norm IEC/EN 60529;

- UL Type 12 (= NEMA 12) degree of protection according to American standards ANSI/UL 50

and UL 50E for indoor use (Eapproval pending);

- each enclosure carries its own part number and conformity markings;

- ambient temperature limits -40 °C / +90 °C.